June 17, 2024, 12:57:32 AM

Author Topic: E7SE/Vbar stops issues..  (Read 4873 times)

Offline Scott Anderson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 608
Re: E7SE/Vbar stops issues..
« Reply #15 on: July 22, 2014, 03:17:38 PM »
Yeah I missed that 9080s are not for a 700, I was thinking about the 9180s
Field Representative

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: E7SE/Vbar stops issues..
« Reply #16 on: July 22, 2014, 03:27:27 PM »
yup, the 9080's even at 8.5v were way too low my mine. I replaced them with the savox servos, and boom! new heli!

I was told by a few guys that they had plenty of torque for the 700, so I tried them. and yes, they did, for just flying around. but as I got a little better and started flying harder, I noticed very quickly that they were not enough...I would be willing to bet with new servos, and the adjustments the vbar guys have thrown out here, you will be up and going perfectly!

now I just need someone to help me with my dang vbar! lol
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline Tom Owen

  • Newbie
  • *
  • Posts: 12
Re: E7SE/Vbar stops issues..
« Reply #17 on: July 22, 2014, 04:15:51 PM »
Hi,

Rob - thanks for the advice! Seems my servos could be the issue... my jive 120hv will only let me run 6V though so i either need some super duper servos at 6V or i need to buy a kontronik kosmik...?

Not sure where to start really, whether to try out your suggestion on the vbar setup or whether to just throw some money at servos?

What servos are you guys using?

Offline Scott Anderson

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 608
Re: E7SE/Vbar stops issues..
« Reply #18 on: July 22, 2014, 06:46:29 PM »
I'm using Savox SC-1258TG on 6V , works good for me
Field Representative

Offline Tom Owen

  • Newbie
  • *
  • Posts: 12
Re: E7SE/Vbar stops issues..
« Reply #19 on: August 18, 2014, 04:19:07 PM »
Well i kinda resolved this another way!

Guy in my club flies spartan, so he gave me a spartan Vx1 and told me to try that. Set it to Bert K mode and turned up the feed forward and it is a totally different helicopter!

Seems my vbar settings had an issue somewhere, so much happier on the spartan at the moment so will be getting it fine tuned on that i think  ;D Wicked heli!

Offline Ross Lawton

  • Factory Specialist
  • Synergy Veteran
  • *****
  • Posts: 793
Re: E7SE/Vbar stops issues..
« Reply #20 on: August 19, 2014, 03:03:06 AM »
Hi Tom,

Pleased to see you got this sorted, it would be interesting to hear if you find out what was causing the issue with the Vbar.

I have just picked up a Spartan VX1e to give a whirl in my E7se. :D

Cheers,
Ross
Team Synergy - UK

Offline Tom Owen

  • Newbie
  • *
  • Posts: 12
Re: E7SE/Vbar stops issues..
« Reply #21 on: August 19, 2014, 11:10:34 AM »
Yeah me too Ross it was getting tedious after 3 months lol! Not sure what setting in the Vbar it would have been but it had the exact same problem, on spartan it's feed forward but on Vbar i would presume it would be the cyclic 8 degrees setting...

Let me know how you get on with the Vx1e, i've got a full size Vx1 and VX1n at the moment on both of my E7's so would be interesting if you feel much difference :)

Tom