Author Topic: HV set up verses LV set up (Read 8458 times)

Ktsn · « **Reply #15 on:** December 11, 2012, 07:10:16 AM »

I also have a Jive 80HV+ on my 600 with an Nimh Eneloop. Never have a problem with it.
I just read that some have some Overcurrent issue but it is more an underrated capacity setup.

RichH · « **Reply #16 on:** December 11, 2012, 08:35:11 AM »

I think you would have over-current trips if you used an 80A ESC in a 6S application. I did on my T550. For 10S or 12S 80A would be fine.

RichL · « **Reply #17 on:** December 11, 2012, 12:59:56 PM »

80A is too small and it doesn't matter who's name is on it!
Rich

Ktsn · « **Reply #18 on:** December 11, 2012, 03:21:14 PM »

Yes of course, 80HV on 12S

My previous post was about BEC success utilization.

RichL · « **Reply #19 on:** December 11, 2012, 03:27:31 PM »

LOL..........

Greg Jackson · « **Reply #20 on:** December 15, 2012, 05:53:41 PM »

So here is the thing. Can I run the Jive 100 even though it is LV with the BLS 255HV servos, or do I HAVE to go to the Jive 120HV? I would prefer to save that extra 200 dollars. Or would the new scorpion 130 work fine?

Chris Sexton · « **Reply #21 on:** December 15, 2012, 05:56:06 PM »

Yeah the esc LV refers to 6s but the servo HV refers to the ability to run them at 7.4v or higher.

Now the jive 100lv built in esc won't go past 6v. Will need a receiver pack or a HV bec.

Sent from my iPhone using Tapatalk

Greg Jackson · « **Reply #22 on:** December 15, 2012, 06:54:36 PM »

I think that's why I'm going to go its Castle now. The 120hv with bec pro since Matt uses that and beats the crap out of the Heli.

Author Topic: HV set up verses LV set up (Read 8458 times)

Ktsn

Re: HV set up verses LV set up

RichH

Re: HV set up verses LV set up

RichL

Re: HV set up verses LV set up

Ktsn

Re: HV set up verses LV set up

RichL

Re: HV set up verses LV set up

Greg Jackson

Re: HV set up verses LV set up

Chris Sexton

HV set up verses LV set up

Greg Jackson

Re: HV set up verses LV set up