E7SE: How optimal is the head geometry for the VBar?

[Enrique Perez]

Great flight Enrique  and thank you for posting up your Vbar files , will make life easy setting her up,

wow very fast tail, i usually sit around 80 with mine or it gets too scary for me 

BTW  is the verification process active for every post or just the 1st few ?

Your welcome. Its only fast if you peg the rudder stick Thanks!!
Can't remember how many post before it stops verification but but think it was less than 5. 

[Chris Wall]

Enrique,
First awesome flight!  I noticed you are running 116 tails in the video at 2100, are you running the 12 tooth spur gear or the default 11T?  I was thinking of running the 696/116 combo, but didn't change out the default tail ratio when building...

[Enrique Perez]

Thanks for the complement!! I run the stock gear gearing that ships with the SE kit 11T (4.9:1).  I have not had any issues with 696/116 but per the manual it recommends the following.

2000 and up - 96-106mm Tail Blades
1950 and lower - 106-116mm Tail Blades

I have dropped my HS  recently to 2050 since it felt better to me after some fine tuning (more head room for vbar gov).