November 23, 2024, 01:01:29 AM
« previous next »
Pages: [1]

Author Topic: Speed up gears  (Read 882 times)

Offline pistol974

  • Newbie
  • *
  • Posts: 7
Speed up gears
« on: October 18, 2013, 03:02:54 PM »
Decided to stretch my e5 and after installing the 54 and 12 tooth gears for the tail is seems to be a bit tight. I can feel each tooth when turning by hand. Not to bad just more than I think is right. I haven't flown it yet to wear them in any. Just thought i'd ask if it is normal to be so tight when new?

Thanks,
Pete
Logged

Offline wbfines

  • Newbie
  • *
  • Posts: 37
Speed up gears
« Reply #1 on: October 18, 2013, 03:08:39 PM »
Mine were same way. Few flights and all was well. :)  Several posts mentioning this. Tight tolerances mentioned.

Edit: Double check boom is flush with clamp
« Last Edit: October 18, 2013, 03:10:54 PM by wbfines »
Logged

Offline pistol974

  • Newbie
  • *
  • Posts: 7
Re: Speed up gears
« Reply #2 on: October 18, 2013, 04:21:55 PM »
Boom is flush. I was able to tilt the gearbox a little when loosening screws. I adjusted the tilt just a hair and it seems to be more like my e7 when new. Still tight but smooth  ;D

Thanks for the help, can't wait to try the e6. As a 550 it was awesome, almost didn't want to change cuz it was so good.

Pete
Logged

Offline Jean-Luc Bolduc

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 614
Re: Speed up gears
« Reply #3 on: October 18, 2013, 06:04:52 PM »
You will like your E6, I love mine so much I got 2x.
Logged
Team Synergy

Offline wbfines

  • Newbie
  • *
  • Posts: 37
Re: Speed up gears
« Reply #4 on: October 18, 2013, 06:10:16 PM »
As 4cyclic said, you will love it stretched. Stretched mine from the start. So I got me another one, to fly as a 550 :)
Logged
Pages: [1]
« previous next »