Main blade and tail blades washers?

[RcHeliFanatic]

Hopefully last question here  do you need washers for the main and tail blades? Seems like a large gap between blade grips and rail blades?

Thanks again
Jim

[curmudgeon]

Yes.  You'll need a total of four 1mm blade spacers; one on top and one on the bottom of each Rail blade.  The E5 blade grip holder can accommodate up to 14mm root thickness.  The Rail blades are 12mm thick at the root.

[Rodney Kirstine]

You also need spacers for the tail blades, they should be with the kit.

[RcHeliFanatic]

No blade washers with kit or blades. That is now holding me up

Darn

[Rodney Kirstine]

The tail blade washers should have been with the kit.  Unfortunately, neither the kit or Rail 556 blades come with the main blade washers.  Shoot me a PM with your mailing address and I can throw a set for the main blades in the mail for you tomorrow. 

Rodney

[RcHeliFanatic]

Pm sent thanks!

[Chris Sexton]

Depending on which batch of kits you got, Matt did put some blade spacers in the second round. Mine were in the box in their own baggie loose under all of the rest of the boxes.

[RcHeliFanatic]

I got a bag with 4 tail washers only

[RcHeliFanatic]

The tail blade washers should have been with the kit.  Unfortunately, neither the kit or Rail 556 blades come with the main blade washers.  Shoot me a PM with your mailing address and I can throw a set for the main blades in the mail for you tomorrow. 

Rodney

You Rock!! Thank you so much for the washers..

[Rodney Kirstine]

You are welcome!  Good luck on the maiden, too!!!

[RichL]

Way to go Rodney!  Anyone who doubts this is a family has only to read a thread like this one.

Rich