November 22, 2024, 05:32:05 PM

Author Topic: Another newbie question Gear ratio  (Read 2698 times)

Offline birddawgg

  • Member
  • **
  • Posts: 51
Another newbie question Gear ratio
« on: June 12, 2013, 09:54:50 PM »
I've gone through the manual from end to end and I cannot find what the gear ratio is for the 20T pinion to 170T main gear. Can anyone pass that info on?

Thanks, Scott
Synergy, Futaba, Cool Power, YS,OS

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: Another newbie question Gear ratio
« Reply #1 on: June 12, 2013, 10:01:56 PM »
Hi Scott,

The gear ratio would be 8.5:1

Mark
« Last Edit: June 12, 2013, 10:06:20 PM by MJBurberry »

flyalan

  • Guest
Another newbie question Gear ratio
« Reply #2 on: June 12, 2013, 10:13:01 PM »
Out of curiosity. What heli is that with a 20t pinion and 170t main gear?

Cheers
Alan

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: Another newbie question Gear ratio
« Reply #3 on: June 12, 2013, 10:16:39 PM »
Must be the N5C Alan

flyalan

  • Guest
Another newbie question Gear ratio
« Reply #4 on: June 12, 2013, 10:21:03 PM »

Out of curiosity. What heli is that with a 20t pinion and 170t main gear?

Cheers
Alan
My bad. Could have swore I was looking at the E5 section:-)
Alan

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: Another newbie question Gear ratio
« Reply #5 on: June 12, 2013, 10:22:06 PM »
That's what I thought  ;D

Offline birddawgg

  • Member
  • **
  • Posts: 51
Re: Another newbie question Gear ratio
« Reply #6 on: June 12, 2013, 10:22:31 PM »
Thanks for the quick info yet again. It is the N5c, I thought I was posting in the correct forum for this question. Had to Look and verify that I was in the N5/N5c forum. Sorry if I confused anyone.

Scott
Synergy, Futaba, Cool Power, YS,OS

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: Another newbie question Gear ratio
« Reply #7 on: June 12, 2013, 10:26:30 PM »
No problem Scott... Anytime.

flyalan

  • Guest
Re: Another newbie question Gear ratio
« Reply #8 on: June 13, 2013, 06:05:04 AM »
Scott,
Again my bad. I need to not post after 9pm.  I start getting a little punchy  ;)


Cheers
Alan

Offline Darren Lee

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 620
Re: Another newbie question Gear ratio
« Reply #9 on: June 13, 2013, 07:24:11 AM »
I've gone through the manual from end to end and I cannot find what the gear ratio is for the 20T pinion to 170T main gear. Can anyone pass that info on?

Thanks, Scott

FYI, if you have tooth counts, the gear ratio is calculated by dividing the main gear count by the pinion count.

i.e. 170/20 = 8.5
Team Synergy / Rail Blades / Morgan Fuel

Offline birddawgg

  • Member
  • **
  • Posts: 51
Re: Another newbie question Gear ratio
« Reply #10 on: June 13, 2013, 09:34:17 AM »
Thanks Darren! That info will make into the note book for sure.
Synergy, Futaba, Cool Power, YS,OS