November 22, 2024, 09:31:47 AM
« previous next »
Pages: [1]

Author Topic: E7se has took flight  (Read 1619 times)

Offline SGM Retired

  • Member
  • **
  • Posts: 94
E7se has took flight
« on: July 20, 2013, 09:35:41 AM »
Well I finally finished the E7se and did a quick flight to check gain settings and it flew excellent. Can't wait till tomorrow to fly more. I must say that canopy is hard to put on and off. Got to find the trick to getting it on. Head speed at 1901 and it floats like a butterfly. Thanks to all for the help and look forward to seeing everyone at IRCHA.

Gary
Logged
Trex 500
Trex 600ePro
Synergy E7se

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: E7se has took flight
« Reply #1 on: July 20, 2013, 09:44:22 AM »
Congratulations Gary on your successful maiden! No better feeling than that after a successful build.
Floats like a butterfly, stings like a bee?  :D

Cheers,
Mark
Logged

Offline SGM Retired

  • Member
  • **
  • Posts: 94
Re: E7se has took flight
« Reply #2 on: July 20, 2013, 10:02:16 AM »
Thanks, it for sure floats. Did a auto and thought it wasn't going to come down, totally different from my Trex 600 which drops like rock. Would like to know if anyone is going with a lower head speed than 1900? What's the lowest you can go and still have some collective control?

Gary
Logged
Trex 500
Trex 600ePro
Synergy E7se

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: E7se has took flight
« Reply #3 on: July 20, 2013, 12:18:23 PM »
Logged
Rodney

Team Synergy

Offline Jason Cummings

  • Field Representative
  • Full Member
  • ****
  • Posts: 238
Re: E7se has took flight
« Reply #4 on: July 20, 2013, 01:54:52 PM »
The canopy gets easier after taking it on and off a few times.
Logged

Offline RichH

  • Newbie
  • *
  • Posts: 45
E7se has took flight
« Reply #5 on: August 05, 2013, 04:44:16 PM »
Convert the front to magnetic mounts. Way easier.


Rich
Logged

Offline SGM Retired

  • Member
  • **
  • Posts: 94
Re: E7se has took flight
« Reply #6 on: August 05, 2013, 05:27:55 PM »
Thanks. Alan showed me how to use the quick connect by taking them out (lower ones) and after the tops are connected then line up the lowers and push the connectors in. It works good. I have seen the magnitcs come lose and go through the blades.

Gary
Logged
Trex 500
Trex 600ePro
Synergy E7se

flyalan

  • Guest
E7se has took flight
« Reply #7 on: August 05, 2013, 08:40:10 PM »

Quote from: SGM Retired on August 05, 2013, 05:27:55 PM
Thanks. Alan showed me how to use the quick connect by taking them out (lower ones) and after the tops are connected then line up the lowers and push the connectors in. It works good. I have seen the magnitcs come lose and go through the blades.

Gary
Gary did learn a trick or two this past week:-)
I enjoyed meeting you Gary!

Cheers
Alan
Logged

Offline SGM Retired

  • Member
  • **
  • Posts: 94
Re: E7se has took flight
« Reply #8 on: August 06, 2013, 01:43:26 PM »
Thanks Alan for the help you gave me this past week. You for sure tought me a thing or two. You are why I like Team Synergy so much, your dedication to helping others is what it's all about. You and Bill really helped me when I needed it the most. Although we didn't get it smoothed out it does fly and will work with it more when I rebuild it.  Did I tell you I Dumb Thumb it into the ground?? Well I have some building to do before South Carolina fun fly. Hope to see you there or at the swarm in Georgia.

Gary
Logged
Trex 500
Trex 600ePro
Synergy E7se

flyalan

  • Guest
E7se has took flight
« Reply #9 on: August 06, 2013, 03:09:57 PM »
No Gary.  I must have missed that one. Hey. It happens!
Yes. I will see you at Heli Extravaganza and the Swarm :-)
Just holler if you need anything.

Cheers
Alan


Alan Butler
Team Synergy
Logged
Pages: [1]
« previous next »