November 23, 2024, 05:08:25 PM

Author Topic: E7 Speed Conversion Available Now!  (Read 2702 times)

Offline Amy Botos

  • Administrator
  • Sr. Member
  • *****
  • Posts: 435

Offline Kevin Feil

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2100
Re: E7 Speed Conversion Available Now!
« Reply #1 on: June 28, 2014, 08:41:40 PM »
Can't Wait!! Ready to get the Ol Man  8) to help me get my 14S bird dialed in..  ;)

K
Team Synergy
Team Futaba
Team Scorpion
Team Morgan Fuels

flyalan

  • Guest
Re: E7 Speed Conversion Available Now!
« Reply #2 on: June 28, 2014, 10:42:27 PM »
Just switched my E7 back to 14s today and reinstalled the Bavarian Demon in anticipation :-)

Sent from my SM-N900V using Tapatalk


Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: E7 Speed Conversion Available Now!
« Reply #3 on: June 29, 2014, 12:24:07 AM »
Can't wait for our Blue guys to compete in the speed cup!
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Roger

  • Full Member
  • ***
  • Posts: 221
Re: E7 Speed Conversion Available Now!
« Reply #4 on: July 01, 2014, 12:21:22 AM »
Just switched my E7 back to 14s today and reinstalled the Bavarian Demon in anticipation :-)

Sent from my SM-N900V using Tapatalk

What brand of servos are you using with the BD Alan?

ROG
ROG
Retired Old Guy

flyalan

  • Guest
Re: E7 Speed Conversion Available Now!
« Reply #5 on: July 01, 2014, 04:13:43 AM »
Usually Futaba. I have used RJX also. The demon does not like Proteks though. I know that from experience. 

Cheers
Alan

Sent from my SM-N900V using Tapatalk


Offline Roger

  • Full Member
  • ***
  • Posts: 221
Re: E7 Speed Conversion Available Now!
« Reply #6 on: July 01, 2014, 03:50:40 PM »
I was chatting with an owner of a N7 at a Phoenix FF this past spring and he advised against the RJX/Demon combination.  Said it was really flaky on his machine.  He was running V-Bar at the FF

ROG

ROG
Retired Old Guy

flyalan

  • Guest
Re: E7 Speed Conversion Available Now!
« Reply #7 on: July 01, 2014, 05:20:05 PM »
Roger the only issue I had with the RJX on the demon was occasionally one servo would not "boot up" so to speak. Unplug and replug and all was good.  The Vbar has done the same thing once that I recall thus far.

Cheers
Alan

Sent from my SM-N900V using Tapatalk


Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: E7 Speed Conversion Available Now!
« Reply #8 on: July 01, 2014, 05:38:40 PM »
Yeah rjx have a power ramp time that is out of this world. I have seen them fail to boot on just about every brand bec on the market.
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

flyalan

  • Guest
Re: E7 Speed Conversion Available Now!
« Reply #9 on: July 01, 2014, 05:58:22 PM »
Yes.  Mine were using a BEC pro. The FBL unit does not seem to have much to do with that behavior.

Cheers

Alan

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: E7 Speed Conversion Available Now!
« Reply #10 on: July 01, 2014, 07:36:50 PM »
Haven't had that issue running a straight 2S Lipo on either of my N7s.  Haven't heard if the BK servos do the same thing but I'm putting a set on my E5 with a Scorpion Commander 130A SBEC, so I'll find out soon.
Rodney

Team Synergy

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: E7 Speed Conversion Available Now!
« Reply #11 on: July 01, 2014, 08:27:05 PM »
Haven't had that issue running a straight 2S Lipo on either of my N7s.  Haven't heard if the BK servos do the same thing but I'm putting a set on my E5 with a Scorpion Commander 130A SBEC, so I'll find out soon.
Apparently Bert has worked directly with the manufacturer that makes the rjx (yes rjx is just an oem of another brand) and has a different setup in his. Narrower dead band, smoother gear train and a different motor controller so his servos shouldn't do this.

I am going to stop saying they are the same as rjx because they really aren't now. First run of minis were but the full size is in fact a different servo. Same factory different materials and qc standards.

I have a set on my e5 12s. Going great. No issues with my cc bec pro.
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Greg Jackson

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1493
    • inner3.com
Re: E7 Speed Conversion Available Now!
« Reply #12 on: July 01, 2014, 08:38:23 PM »
My full size BK servos have been great as well. About as reliable as the Futaba servos I have so far.  I can't say that with other servos I have run in the past. 
Synergy & Rail Field Representative
Team Scorpion||Team BK Servos||Team Pulse|

www.inner3.com

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: E7 Speed Conversion Available Now!
« Reply #13 on: July 01, 2014, 08:59:18 PM »
That's good to know that you've been using them with a bec with no issues, Chris.  I knew they were manufactured by RJX which is why I was wondering about them with a bec.
Rodney

Team Synergy

Offline Mark Burberry

  • Field Representative
  • Synergy Veteran
  • ****
  • Posts: 662
Re: E7 Speed Conversion Available Now!
« Reply #14 on: July 02, 2014, 12:23:31 PM »
http://synergyrchelicopters.com/2014/synergy-e7-speed-conversion-is-here/

Received mine today. Thanks Amy!
Very impressive... From the packaging down to the canopy.

Excellent job guys!





Cheers,
Mark