November 21, 2024, 03:19:56 PM
« previous next »
Pages: [1]

Author Topic: New head  (Read 2013 times)

Offline troasb

  • Full Member
  • ***
  • Posts: 144
New head
« on: September 02, 2015, 07:03:47 PM »
I have a friend that tells me that E7 and E7se actually have a head originally built for a 600 size heli. Is that right? As I understand it now, E7se has a new head compared to E7. Is the E7se head the same as for N7?
Logged

Offline Jason Cummings

  • Field Representative
  • Full Member
  • ****
  • Posts: 238
Re: New head
« Reply #1 on: September 02, 2015, 08:03:57 PM »
The original E7 head was built as a 700 size head. It was taller and the swash follower arms were not on the head block. I'm sure someone will correct me if I'm wrong, but I do believe the N7 shares the same head.
Logged

Offline curmudgeon

  • Synergy Veteran
  • *
  • Posts: 578
Re: New head
« Reply #2 on: September 02, 2015, 10:36:24 PM »
Quote from: troasb on September 02, 2015, 07:03:47 PM
...E7 and E7se actually have a head originally built for a 600 size heli....

The original E7/6 kit was a 700 size kit that could be built with included parts to a 600 size with a shorter tail and blade hole adapters.  I have not heard of anyone shrinking the E7SE down to a 600 size.

The original E7/6 came with a now outdated head with separate swash followers arms.


The E7SE kit comes with the modern head with integrated swash follower arms.
Logged

Offline troasb

  • Full Member
  • ***
  • Posts: 144
Re: New head
« Reply #3 on: September 03, 2015, 03:05:31 AM »
Thank you for your replies. But it seems like the blade grips and swash plate is still the same?
Logged

Offline curmudgeon

  • Synergy Veteran
  • *
  • Posts: 578
Re: New head
« Reply #4 on: September 03, 2015, 07:25:24 AM »
The Blade Grips are the same part number 520-514.  However, the E7SE blade grips come with grease ports.

E7/6 Blade Grips


E7SE Blade Grips.


I believe the swash is the same for both, part 200-401.
Logged

Offline troasb

  • Full Member
  • ***
  • Posts: 144
Re: New head
« Reply #5 on: September 03, 2015, 07:35:24 AM »
Thank you for your useful repiles curmudgeon.

Anybody know if the E7se and N7 have the same head?
Logged

Offline Mike Spano

  • Synergy Hero
  • **
  • Posts: 1038
Re: New head
« Reply #6 on: September 03, 2015, 07:58:21 AM »
the E7SE and the N7 do use the same head.

there are a few differences in the new head they use and the older E6/7 head though. the blade grips now have a grease port in them, the head is much lower, the pitch arms were re-designed to give better geometry with modern FBL units, the swash follower arms are integrated, and the head uses the head axle pivot.
Logged
Team Synergy
Rail Blades
TRM Power
Team Byron Fuels
MKS Servos

Offline troasb

  • Full Member
  • ***
  • Posts: 144
Re: New head
« Reply #7 on: September 03, 2015, 09:00:33 AM »
Quote from: Mike Spano on September 03, 2015, 07:58:21 AM
the E7SE and the N7 do use the same head.

there are a few differences in the new head they use and the older E6/7 head though. the blade grips now have a grease port in them, the head is much lower, the pitch arms were re-designed to give better geometry with modern FBL units, the swash follower arms are integrated, and the head uses the head axle pivot.

Hi Mike

Thank you for your useful reply. That was what I thought too. Now I can bash my friend here!

Trond
Norway
Logged
Pages: [1]
« previous next »