Author Topic: tail rotor pitch arms are very tight (Read 1123 times)

Terryla · « **on:** December 06, 2015, 04:14:28 PM »

I followed the manual on installing the tail rotor pitch arms but it seems to be very very tight.i was wondering if it would be alrite to use a ball sizing tool on the pitch arms.thanks for any feed back on this

Jason Cummings · « **Reply #1 on:** December 06, 2015, 06:20:05 PM »

Yes. Just a little at a time.

Kevin Feil · « **Reply #2 on:** December 06, 2015, 10:13:00 PM »

Also make sure the PC arms are not installed backwards ( flipped 180) I have seen this happen before.. Double check before you begins sizing..

BR,

K

Grees01 · « **Reply #3 on:** December 07, 2015, 12:40:49 AM »

I did on mine. They were pretty tight too. Much better after a little sizing.

Roger · « **Reply #4 on:** December 13, 2015, 10:43:13 PM »

I had to resize mine on both my N7 and E5. Not much at all on either Heli.

ROG

Author Topic: tail rotor pitch arms are very tight (Read 1123 times)

Terryla

tail rotor pitch arms are very tight

Jason Cummings

Re: tail rotor pitch arms are very tight

Kevin Feil

Re: tail rotor pitch arms are very tight

Grees01

Re: tail rotor pitch arms are very tight

Roger

Re: tail rotor pitch arms are very tight