April 29, 2024, 10:05:36 AM
« previous next »
Pages: [1]

Author Topic: 806 gears  (Read 2270 times)

Offline Lighthorse

  • Newbie
  • *
  • Posts: 3
806 gears
« on: January 25, 2020, 08:16:24 PM »
going to build in the 806 configuration. Can someone tell me the gears I will need?
It looks like I need to change the Motor pinion, Tail gear and Main gear.
I have not gotten the Motor yet, was thinking of getting Xnova Lightning 4535-460KV
And using a Gens Ace 12S LiPo Battery Stick 60C (44.4V/5000mAh)
I haven't received the kit yet but am trying to get the upgrade parts now.
Logged

Offline Lighthorse

  • Newbie
  • *
  • Posts: 3
Re: 806 gears
« Reply #1 on: January 26, 2020, 04:39:15 PM »
Anyone out there Build the 806 Configuration?
I would like to know what gear sets were used.
Logged

Offline Wolf51

  • Full Member
  • ***
  • Posts: 218
Re: 806 gears
« Reply #2 on: January 26, 2020, 11:32:59 PM »
You'll find information for all the build options at the end of the 766 manual.

It covers 12s and 14s systems, different  motor kv and pinion combinations for various target headspeeds and tail drive recommendations.

Good luck with your build.

Sent from my SM-G930F using Tapatalk

Logged

Offline steffgiguere

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1373
Re: 806 gears
« Reply #3 on: January 27, 2020, 07:31:28 AM »
I have one. Built so long ago that I don't remember, I'm sure I followed what is written in the instructions.

Good luck.
Logged
Team Synergy, Canada

Offline Lighthorse

  • Newbie
  • *
  • Posts: 3
Re: 806 gears
« Reply #4 on: January 31, 2020, 02:05:54 PM »
OK thanks guys
Logged

Offline Charles Carrington

  • Field Representative
  • Member
  • ****
  • Posts: 64
Re: 806 gears
« Reply #5 on: February 05, 2020, 07:38:34 PM »
If youre going  806 then i would use at lease 500-520kv a 460kv seems to be beter for a 14s setup
Logged
Synergy E5s - E7

Synergy N5c - N7

Team Synergy - Rail Blades

Offline Dennis P

  • Newbie
  • *
  • Posts: 5
    • TheHeliFarm
Re: 806 gears
« Reply #6 on: March 08, 2020, 11:01:40 PM »
   The most important info that you need is what headspeeds are you planning to run. Myself I would be running a 450-470kv motor with the speed up tail ratio on 12s as I like a bit lower headspeeds. Without this info people will be telling you what they like and not what you need.  :)
Logged

Offline steffgiguere

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 1373
Re: 806 gears
« Reply #7 on: March 09, 2020, 07:07:27 AM »
Forgot to say, but mine flies on 14s, much better than 12s.
Logged
Team Synergy, Canada

Offline helipilotk3

  • Newbie
  • *
  • Posts: 26
Re: 806 gears
« Reply #8 on: May 17, 2020, 05:46:00 PM »
Mine flies on 14S  x 5000 mah, used  the smaller motor pinion and the speed up gear for the tail. Motor is XNova  450kv and Hobbywing 160 HV. BK  servos
Logged
Pages: [1]
« previous next »