November 22, 2024, 11:24:33 PM
« previous next »
Pages: [1]

Author Topic: Is necessary contact pinion with counterbearing?  (Read 1584 times)

Offline psena

  • Newbie
  • *
  • Posts: 5
Is necessary contact pinion with counterbearing?
« on: April 19, 2012, 08:19:53 PM »
I need give pinion higher in motor shaft, because pinion sometimes go in contact with maingear.
I cant get some good answer for this question. I asked some friends, and I got diferent advice.
(Hacker Turnado)
Sorry for my english :-\
« Last Edit: April 19, 2012, 08:21:52 PM by psena »
Logged

Offline seldred

  • Sr. Member
  • ****
  • Posts: 327
Re: Is necessary contact pinion with counterbearing?
« Reply #1 on: April 19, 2012, 08:32:30 PM »
The pinion does need to rest on the bearing block below it. This helps with the mesh as well as helps hold the bearing in the bearing block. 

Best,
-Steve
Logged

Offline psena

  • Newbie
  • *
  • Posts: 5
Re: Is necessary contact pinion with counterbearing?
« Reply #2 on: April 20, 2012, 02:42:06 AM »
Thanks you for fast answer Seeve! :)
Logged

Offline psena

  • Newbie
  • *
  • Posts: 5
Re: Is necessary contact pinion with counterbearing?
« Reply #3 on: April 20, 2012, 09:39:01 AM »
I solve it, that i used 6x12x 1mm shim and all is ok. Pinion touch bearing block and now its enough high for right work.
Thanks All!
Logged

Offline Matt Botos

  • Synergy Hero
  • **
  • Posts: 1573
    • Matt Botos
Re: Is necessary contact pinion with counterbearing?
« Reply #4 on: April 20, 2012, 08:02:14 PM »
Yes, the pinion does need to contact the bearing. This prevents motor bearings from being destroyed due to helical forces.

Thanks,

Matt
Logged

flyalan

  • Guest
Is necessary contact pinion with counterbearing?
« Reply #5 on: April 23, 2012, 09:13:41 PM »
I missed that. Moved the pinion down. Solved my motor overheating issue.


Sent from my iPhone using Tapatalk
Logged
Pages: [1]
« previous next »