November 23, 2024, 06:04:39 PM

Author Topic: JR servos and E5 and N7  (Read 1317 times)

Offline Jmiceli11

  • Field Representative
  • Member
  • ****
  • Posts: 85
JR servos and E5 and N7
« on: February 26, 2014, 03:49:25 PM »
Hello,

For those using JR servos which arms did you use. It seems the included arms won't work with the small JR wheels without modification. Pictures would be appreciated.

Thanks,
John

Offline Mike King

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 256
  • Viva la nitro!
Re: JR servos and E5 and N7
« Reply #1 on: February 26, 2014, 06:48:53 PM »
I think many using the JR servos use Dubro long arms.  Here is a picture of them on Steve Graham's N7. (He posted this in the N7 electronic placement photo thread.)

« Last Edit: February 26, 2014, 06:51:45 PM by Kinger »
Mike King
Field Representative

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: JR servos and E5 and N7
« Reply #2 on: February 26, 2014, 10:43:45 PM »
My e7se currently has jr8917hvs on it with  DuBro Super Stength standard length arms. Work great. You will have to drill the hole in the horn out a bit to accommodate the servo ball.

sent from my Verizon Samsung Galaxy Note 2

Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Mike King

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 256
  • Viva la nitro!
Re: JR servos and E5 and N7
« Reply #3 on: February 27, 2014, 08:00:08 AM »
Thanks for the clarification on that Chris.  I knew they were Dubro arms, but I didn't know they were standard length.
Mike King
Field Representative

Offline Chris Sexton

  • Factory Specialist
  • Synergy Hero
  • *****
  • Posts: 2729
  • Admiral, There be whales here!
Re: JR servos and E5 and N7
« Reply #4 on: February 27, 2014, 08:56:43 AM »
Thanks for the clarification on that Chris.  I knew they were Dubro arms, but I didn't know they were standard length.

I am sure the Long versions will work too, just don't need the extra length.
Chris Sexton
Synergy Factory Specialist / Rail Blades / Team Scorpion

Offline Rodney Kirstine

  • Field Representative
  • Synergy Hero
  • ****
  • Posts: 2112
Re: JR servos and E5 and N7
« Reply #5 on: February 27, 2014, 09:08:42 AM »
I'm using the Dubro arms on my E5.  I have also used the round JR wheels, you just have to enlarge the big center hole on the carbon fiber arm.
Rodney

Team Synergy

Offline Tommy Wagner

  • Field Representative
  • Sr. Member
  • ****
  • Posts: 418
Re: JR servos and E5 and N7
« Reply #6 on: February 27, 2014, 07:43:47 PM »

I'm using the Dubro arms on my E5.  I have also used the round JR wheels, you just have to enlarge the big center hole on the carbon fiber arm.

This is what I use also the small HD JR wheel

Offline RichH

  • Newbie
  • *
  • Posts: 45
Re: JR servos and E5 and N7
« Reply #7 on: February 28, 2014, 08:30:51 PM »
I'm using Mikado arms for JR servos. They're stiff, but the spline will trip in a crash and protect the servo.


Rich